Cuta Copter Fishing Drones Australia

Cuta-Copter Australia has one mission – To provide the most advanced, stable, and robust fishing drones available. Since 2014 Cuta-Copter has been synonymous with building the toughest fishing drones on the planet for use in the harshest marine environments. Since those early pioneering days, Cuta-Copter has built upon its experience and listened to its customers to build and provide anglers with the tools to get the job done.

Pilot and people safety is at the centre of the design for all of our fishing drones as is the need to make these fishing drones built to last.

The release of the EX-1 is the result of 5 years of research, development and testing to build a fishing drone that excels above the rest. It’s extensive list of features is testament to Cuta-Copter South Africa and Cuta-Copter Australia.

The EX-1 features the Pixhawk 4 mini, one of the most advanced flight controllers on the market making these fishing drones in a league of their own. The sheer speed that data is processed on these drones means supreme flight stability. The extensive list of advanced flight modes has never been seen on waterproof fishing drones before.

The Cuta-Copter Australia team works very closely with Cuta Copter South Africa to continually develop and improve upon what is already considered the most advanced fishing drones in the world. Continual improvement is our mission – perfection is our goal.

In addition to the development and design of these outstanding fishing drones, Cuta-Copter Australia is 100% committed to providing outstanding customer service and support. Our manuals, resources and ongoing customer support is second to none.

History of Cuta Copter

Cuta-Copter Australia Team
Team Cuta Copter South Africa
Scroll to Top

AIRCRAFT

Waterproof Level: IP67 on main electronics chamber
Surface Buoyant: Level 2 Flotation
Drone Weight: 1720g (without battery)
Dimensions: 455mm x 455mm
Max Ascend Speed: 10m/s
Max Descend Speed: 3m/s
Max Flight Speed: 65kph (User Adjustable)
Max Flight Altitude: 40M – Set at factory
Wind Rating Typical Maximum: 40kph (21-22Knots)
Wind Rating Peak Gusts: 50kph(26-27 Knots)
Max Flight Time (per charge): 23 minutes no load (4-5 drops at 300M, 700gm bait)
Max Flight Range: 1.5km – Geofence set to 500M
Max Payload Capacity: 4.0KG (Recommended safe lifting weight 3.5KG)
ESC: 40A
Propellers: 15” carbon fibre propellers
Working Temperature: -10°C ~ 40°C
APP: SkyDroid Tower (Android Only)
Motor: Brushless/Waterproof

GPS

Concurrent reception of up to 3 Global Navigation Satellite Systems ‘GNSS’
Communication and acquisition of 4 GNSS platforms – GPS, Galileo, GLONASS and BeiDouh.

FLIGHT CONTROLLER

Type: Pixhawk 4 mini
Processor: 32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
Sensors: 2 x Accelerators, 2 x Gyro’s, Magnetometer, Barometer
PMU: PM06 V2

REMOTE CONTROL

Weight: 660g
Frequency: 2.400-2.483GHz
Range: 1.5km (unobstructed, free of interference) Set at factory to 500M (user adjustable)
Modulation: New FHSS
Working Current: 100mAh
No. of Channels: 10
Battery: 2 X 18650 Lithium batteries (Provided)

VIDEO TRANSMISSION

Range: 1.5km Max (unobstructed, free of interference)
Working current: 180mA
Gimbal: 1 AXIS
Camera: 720P HD 1280×720

STANDARD BATTERY (6S/5000MAH 22.2V LIPO)

Battery Type: LiPo
Battery weight: 651gms
Operating Temp: -10̊ to 50̊C
Charging Current: 5AMP
Voltage: 22.2V

Charger

Type: 100W Smart Balance Charger LiPo
Battery Charge Time: 60mins at 30% level

AIRCRAFT

Waterproof Level: IP67 on main Chamber

Surface Buoyant: Level 2 Flotation
Drone Weight: 1739g (without battery)
Dimensions: 355mm x 355mm
Max Ascend Speed: 10m/s
Max Descend Speed: 3m/s
Max Flight Speed: 65kph (User Adjustable)
Max Flight Altitude: 40M – Set at factory
Wind Rating Typical Maximum: 40kph (21-22Knots)
Wind Rating Peak Gusts: 50kph(26-27 Knots)
Max Flight Time (per charge): 23 minutes no load
Max Flight Range: 1.5km – Geofence set to 500M
Max Payload Capacity: 2.5KG (Recommended safe lifting weight 2KG)
ESC: 40A – sealed in di-electric resin
Propellers: 13” carbon fibre propellers
Working Temperature: -10°C ~ 40°C
APP: SkyDroid Tower (Android Only)
Motor: Brushless/Waterproof

GPS

Concurrent reception of up to 3 Global Navigation Satellite Systems ‘GNSS’ – GPS, Galileo, GLONASS and BeiDouh

FLIGHT CONTROLLER

Type: Pixhawk 4 mini
Processor: 32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
Sensors: 2 x Accelerators, 2 x Gyro’s, Magnetometer, Barometer
PMU: PM06 V2

REMOTE CONTROL

Weight: 660g
Frequency: 2.400-2.483GHz
Range: 1.5km (unobstructed, free of interference) Set at factory to 500M (user adjustable)
Modulation: New FHSS
Working Current: 100mAh
No. of Channels: 10
Battery: 2 X 18650 Lithium batteries (Provided) 20 hours flight time

VIDEO TRANSMISSION

Range: 1.5km Max (unobstructed, free of interference)
Working current: 180mA
Camera: 720P HD 1280×720

STANDARD BATTERY (6S/5000MAH 22.2V LIPO)

Battery Type: LiPo
Battery weight: 821gms
Operating Temp: -10̊ to 50̊C
Charging Current: 5AMP
Voltage: 22.2V

Charger

Type: 100W Smart Balance Charger LiPo
Battery Charge Time: 90mins